Quote for Boeing 747 8 Parts

Model No: Boeing 747 8

Category: Commercial Aircraft

Aircraft Type: Jumbo Passenger Jets

Manufacturer: Boeing

Country: United States

Manufactured: 2011 to: Onward

Avionics: Rockwell Collins Avionics

Engine: 4 X General Electric GEnx 2B67

Power: 66,500 pound-force

Max Cruise Speed: 564 knots - 1,045 Km/h

Travel Range: 8,000 Nautical Miles - 14,816 Kilometers

Fuel Economy: 0.12 nautical mile / gallon - 0.059 kilometres / litre

Service Ceiling: 43,000 feet

Take Off Distance: 3292 metre - 10,800.39 feet

Landing Distance: 2134 metre - 7,001.23 feet

Max Tak eOff Weight: 2,138,448 Kg - 4,714,422 lbs

Max Payload: 75,000 Kg - 165,345 lbs

Fuel Tank Capacity: 64,225 gallon - 243,117 litre

Baggage Volume: 161.5 m3 / 5,703 ft3

Seats Economy/General Class: 700 seats

Seats Business Class: 600 seats

Seats First Class: 467 seats

Cabin Height: 2.39 metre - 7.84 feet

Cabin Widtht: 6.1 metre - 20.01 feet

Cabin Length: 63.25 metre - 207.51 feet

Exterior Length: 76.4 metre - 250.65 feet

Fuselage Diameter: 6 metre - 19.68 feet

Wing Span Rotor Diameter: 68.5 metre - 224.73 feet

The Boeing 747-8 is a jumbo passenger jet. It is currently being priced at about three hundred fifty one million US dollars. The Boeing 747-8, also known as the Boeing 747-8 Intercontinental was manufactured by the United States based Boeing company in the year 2011 and has since been continuing its line of production.

Current Cost $ 351.4 million U.S.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If you Have Multiple Parts Requirements,
You Can Upload Your Parts List or BOM Here!

Upload

Specifications

While the Boeing 747-8 Intercontinental was manufactured by the Boeing company, many of the parts come from other reliable and trusted manufacturers such as the Rockwell Collins Avionics company. General Electric provided the engine, which is of the 4 X General Electric GEnx 2B67 and has a tremendous power of 66,500 pound-force, along with a maximum cruise speed of 564 knots or 1,045 kilometers per hour. Meanwhile the travel range is an impressive 8,000 nautical miles, meaning that the Boeing 747-8 Intercontinental can travel as far as 14,816 kilometers. The fuel economy is primarily very conservative as it can reserve as much as 0.12 nautical mile per gallon or, when converted to metric terms is 0.059 kilometres per litre. The service ceiling is also very high as it goes up to 43,000 feet. Meanwhile the take off distance amounts to as much as 3292 metres to about 10,800.39 feet, while the landing distance amounts to approximately

2134 metres to 7,001.23 feet.

If you or your company need to purchase or acquire a part or component from the aviation or IT hardware sector, get in touch with our team today! We are certified and approved by the Federal Aviation Authority to source and deliver superior quality aviation parts. In addition to being among the only trusted distributors with a strict and rigorous No China Sourcing pledge, our company is also certified with an ISO 9001:2015 and an FAA AC 00-56B accreditation. Contact us today by phone or email, or simply use our online parts directory to submit an Instant RFQ.

Search by Aerospace Part Types

CAGE Code Lookup

Complete Aerospace and NSN Parts Purchasing Platform

	AS9120B and ISO 9001:2015
	Aviation Suppliers Association Member
	FAA AC 0056B Accredited
	AS 6081:2012 Certification
	ESD S20.20-2014 Certification