Quote for Mcdonnell Douglas Dc 8 71 Parts

Model No: Mcdonnell Douglas Dc 8 71

Category: Commercial Aircraft

Aircraft Type: Mid Size Passenger Jets

Manufacturer: McDonnell Douglas

Country: United States

Manufactured: 1969 to: 1988

ICAO: DC87

Avionics: Dual Collins VHF 21D, HF 628T-1 , TDR-94D

Engine: 4x CFM 56-2 C6 turbofan

Power: 34,000 pound-force

Max Cruise Speed: 483 knots - 895 Km/h

Approach Speed: 145 knots

Travel Range: 6,500 Nautical Miles - 12,038 Kilometers

Fuel Economy: Fuel Economy:

Service Ceiling: 42,000 feet

Rate of Climb: 2200 feet/minute - 11.18metre/second

Take Off Distance: 3505 metre - 11,499.20 feet

Landing Distance: 1801 metre - 5,908.72 feet

Max Tak eOff Weight: 148,800 Kg - 328,044 lbs

Max Payload: 27,400 Kg - 60,406 lbs

Fuel Tank Capacity: 23,393 gallon - 88,552 litre

Baggage Volume: 71 m3 / 2,507 ft3

Seats Economy/General Class: 259 seats

Cabin Height: 2.21 metre - 7.25 feet

Cabin Widtht: 3.51 metre - 11.52 feet

Cabin Length: 50.1 metre - 164.37 feet

Exterior Length: 57 metre - 187.01 feet

Tail Height: 13.1 metre - 42.98 feet

Fuselage Diameter: 3.74 metre - 12.27 feet

Wing Span Rotor Diameter: 45.24 metre - 148.42 feet

Wing Tips: no winglets

The McDonnell Douglas DC-8-71 is a variant within the Douglas DC-8 series of narrow-body airliners. Alongside its variants, the DC-8 family was produced over the years from 1958 to 1972, and 556 units were produced in total. Although only a small number continue to operate in limited service as cargo aircraft, the Douglas DC-8 has historically been used by a number of operators including United Airlines, UPS Airlines, and Delta Air Lines. The Douglas DC-8-71 variant was directly converted from the DC-8-61, replacing its engines and some various structural components.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If you Have Multiple Parts Requirements,
You Can Upload Your Parts List or BOM Here!

Upload

With four CFM 56-2 C6 turbofan engines producing 34,000 pound-force, the McDonnell Douglas DC-8-71 can reach a maximum cruise speed of 483 knots. The fuel tank capacity of the aircraft is 23,393 gallons, permitting a travel range of 6,500 nautical miles with a fuel economy equating to 0.28 nautical miles per gallon. During flight operations, the DC-8-71 may accommodate up to 259 passengers across its cabin seating, accounting for its 163,700 pound payload capacity. Altogether, the DC-8-71 may operate with a maximum takeoff weight of 328,044 pounds.

At ASAP Aerospace, we provide our customers access to over six billion new, used, and obsolete components from our unrivaled inventory. We are the only independent distributor upholding a strict no China sourcing pledge, choosing instead to only stock our parts from top global manufacturers that we trust to deliver a premium product. To ensure that our customers receive the best, our team subjects each and every item to thorough quality assurance testing and inspection. Due to our unwavering commitments to such quality standards and practices, we have established ourselves as an FAA AC 00-56B, ISO 9001:2015, and AS9120B certified enterprise. Experience the ASAP difference today and receive a personalized quote when you fill out and submit an Instant RFQ.

Search by Aerospace Part Types

CAGE Code Lookup

Complete Aerospace and NSN Parts Purchasing Platform

	AS9120B and ISO 9001:2015
	Aviation Suppliers Association Member
	FAA AC 0056B Accredited
	AS 6081:2012 Certification
	ESD S20.20-2014 Certification